header text.gif (2968 bytes)

CIRCULAR INTERPOLATION FOR FACE MILLS

Circular Interpolation from above
To achieve the maximum diameter the outside edge of the insert must be aligned with the centre of the circle to be machined Circular Interpolation from side To achieve the minimum diameter the inside edge of the insert must be aligned with the centre of the circle to be machined
    
MAYDOWN MAXIMUM MINIMUM
CODE DIA mm DIA mm
S9050MM 100 75
S9063MM 126 101
S9080MM 160 135
S90100MM 200 174.5
S90125MM 250 225
HS4550MM311 126 96
HS4563MM311 152 121
HS4580MM311 186 156
HS45100MM311 226 209
HS45125MM311 278 247
HS45160MM311 348 317
HD45100MM 240 194
HD45125MM 290 247
HD45160MM 360 316
AP9040MM 80 66
AP9050MM 100 86
AP9063MM 126 112
HL9050MM 100 81
HL9063MM 126 107
HL9080MM 160 138.5
HL90100MM 200 183
       
MAYDOWN MAXIMUM MINIMUM
CODE DIA mm DIA mm
M50MM 116 93.5
M63MM 142 119
M80MM 176 152.5
M100MM 216 192.5
HM80MM 183 148
HM100MM 223 188
HM125MM 273 237
SAL63MM90H 126 116
SAL80MM90H 160 150
SAL100MM90H 200 191
SAL125MM90H 250 240
SAL160MM90H 320 310
SAL200MM90H 400 390
SAL40MM45H 108.5 77
SAL50MM45H 128.5 97
SAL63MM45H 154.5 123
SAL80MM45H 188.5 156.5
XL905016 100 81
XL906316 126 107
XL9080916 160 138.5
XL9010016 200 183

XL9012516

 250 232